DEI 93405 – Heat Sheath 1/2in to 1-1/4in I.D. x 50ft Spool

Description

DEI 93405 – Heat Sheath 1/2in to 1-1/4in I.D. x 50ft Spool

Hose and Wire Sleeve – Heat Sheath – Adjustable – 1/2 to 1-1/4 in ID – 50 ft – Hook and Loop Closure – Aluminum / Fiberglass – Silver – Each

One 50 foot roll of Heat Shroud with a 1/2 inch to 1-1/4 inch inside diameter.

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 – 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 – 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.

• Versatility Of Fitting Diameters 1/2 in. To 1 1/4 in.
• Convenient Hook/Loop Designed Edges
• Withstands 500Degrees F Continuous/2000Degrees F Radiant Heat
• No Need To Remove Wires And Hoses
• Easily Trimmed To Length
• Fireproof

Includes: One 50 foot roll of Heat Shroud with a 1/2 inch to 1-1/4 inch inside diameter.Color: SilverInside Diameter: 1.25Length: 600Material: Aluminized Outer Layer Bonded to FiberglassWidth: 1.25A/N Size: N/AMax Temperature Rating: 500 DegreeProduct Length: 50 ft.Direct Heat Resistance: 500°F